Download WinSCP and install the application. If you don't already, download and install Putty. Download the attached .ini file. This will be used to load the configuration for WinSCP.
- Turn on the FL and wait till it connects to the Ruckus AP. You don't need to start Cheetah at this time.
- Run PuTTY, and connect to the Freelynx via SSH and IP 192.168.4.101
- When prompted for login name, use root. Password is also root. If the connection works, you will see a series of text lines in the puTTY terminal window.
- Start WinSCP. Use the .ini file provided to load the configuration. If you are unable to download that, use the settings in the image below:
- :
- Click Login.
- You should see a screen similar to this:
- Navigate to mnt/data on the right tree navigation screen. Here you will find the crd files
- We recommend you copy the files off, make sure they are transferred correctly, then remove the files from the SD card.
- When you are done, you can close the windows.
Comments
0 comments
Please sign in to leave a comment.